CF745
TEC Lighting UV Coaters are designed to be vented outside the facility to prevent ozone and slight odor. If you are unable to vent the UV coater as recommended, you can rely on the PURE Air,Activated Carbon System to get the job done. The PURE Air carbon filter will help eliminate the ozone and odor produced by certain coating materials. This device can either be mounted directly to the UV coater or placed in the room to scrub the entire air content of that room.
Although TEC UV coating is 100% VOC free, there is a slight discharge of odor during the coating process that the PURE Air can help eliminate. In addition, the PURE Air can also be used in conjunction with wide format printers and other environments where VOC’s and particles need to be removed from the air.
With a small and modular design, the PURE Air filters are ideal for enclosed rooms without adequate ventilation. PURE Air filters can easily be installed onto any 3”,4” or 6” exhaust ports, with CFM rating from 100- 1000. Just another step into the Eco-friendly Green Zone.
In addition to our full line of UV coaters, TEC Lighting also offers an impressive and proven variety of UV coating to compliment both TEC and other UV coaters. With the TEC Coat line of UV coating, you can be rest assured that you will experience consistent finishes from the beginning to the end of a production run. TEC Lighting has formulated proven ultraviolet, cured coatings in a variety of gloss ranges including gloss, satin and matte.
TEC Coat UV Coating is applied by flooding a sheet of paper with a specialized UV solution, and then transferred under resilient UV lighting. The UV coating dries instantaneously, revealing a reflective and vibrant finish, without the sticky effects of conventional UV coatings. In addition to professional aesthetic quality, TEC Coat UV Coatings act as a barrier for printed materials, preventing scuffs and scratches.
Whether you’re looking for a finish that is dry-erase, glue-able, write-able, or for offset and digital presses, the TEC Coat offers an array of applications that can fulfill your custom curing needs. TEC Coat UV Coating is always 100% VOC free and contains no harmful irritants.
The Supreme Lighting source for today’s industry.
TEC Lighting provides standard and specialty application lighting products for industries involved in printed circuit board fabrication, medical & scientific instrumentation, machine vision, CD manufacturing, water purification, cinema projection, video projection, live-stage entertainment, theme park attractions, plate-making, solar simulation, pharmaceutical testing, plastics, wood coating, and printing. TEC Lighting is an industry leader in the manufacturing and distribution of the following product lines:
TEC Lighting’s WebCure lamp heads feature state-of-the-art technology and design. These advanced features, coupled with the flexibility of fitting almost any press type, have made TEC Lighting an industry leader in UV curing technologies. The WebCure UV curing system provides outstanding performance and reliability with current applications in the printing, packaging, plastics, wood, and electronics industries. TEC Lighting is known as “The first name in UV curing solutions.”
Our customized “Cool Option” consists of an optically balanced package, which provides the ability to run high-heat sensitive substrates. Our special combination of dichroic filters, hot-mirrored quartz barrier glass, and our closed-loop auto damper heat management package enables our system to cure at both low and high print speeds without the use of chill rolls.
The heat management cooling system is linked through a dedicated blower, which is driven through the power supply. The system uses RTD sensors, thermocouples and an auto damper all looped through a digital thermostat for optimum heat management.
The TEC Lighting lamp cassettes come standard with mercury vapor lamps. Cassettes are easily removable for serviceability and for mobility from station to station. Our multi-focal point, highly polished elliptical reflectors enable maximum UV spectral output while also acting as a clam-shell shutter mechanism, providing web protection in press idle mode. Our single Uni-Cable design provides lamp power, pneumatics and lamp controls along with the utility of quick disconnects.
The state-of-the-art in power supplies and operation controls
TEC Lighting offers a comprehensive selection of power supplies and operator control panels to meet a variety of commercial needs. Our state-of-the-art ballast control feature maintains consistent power levels regardless of minor voltage irregularities or ambient temperature fluctuations. Available in both 50 and 60 hertz models and various voltages, all components are UL, CSA, and CE approved for the highest in quality and design.
The WebCure Series 3000 command center is a logic-based relay system with (3) three manual power settings and a remote operator control panel. It is equipped with a two-position damper linked with an RTD sensor to an analog exhaust temperature controller. These interlinked components maintain constant and accurate lamp temperatures. The system is built performance tough and is very cost efficient. The 3000 series comes in single and double lamp configurations.
The WebCure Series 4000 command center was designed especially for the Narrow Web-flexo market, where presses are equipped with UV interface options. These presses already have connections available, to which we can interface with features such as a shutter operation signal with real press speed and auto power-ramping. The logic-based relay system has the three power settings and remote control found on the 3000 series as well as a manual cool down mode and an emergency stop. The 4000 Series has the cooling capabilities of the 5000 Series with a digital thermostat and an auto-damper temperature feedback cooling system. The 4000 Series also comes in single and double lamp configurations.
The WebCure Series 5000 command center is the thoroughbred of our systems. The 5000 Series standard PLC controls provide for easy changes to the lamp operating system. Program set-up parameters facilitate the operator/equipment interface, and a remote touch-screen interface is standard on multi-lamp systems. The 5000 Series comes equipped with the digital thermostat and auto damper temperature feedback cooling system to preserve optimal substrate temperatures.
Standard PLC Operating Options Include:
Individually programmable lamp shutter timing.
Individually programmable power ramping.
The “Systems Interface” provides interactivity between our PLC and competitors’ Legacy
Systems that may already be in place. Our single command center can run the multiple systems concurrently
*Optical sensors are now available as an added option. These sensors monitor the lamp output and signal the operator control. This tool can also be useful in monitoring lamp and shutter maintenance. Other special and customized options are also available
TEC Lighting’s Supreme Series conveyor systems are manufactured to provide superior performance of UV curable finishes. We design each system around the customer’s specific requirements. These systems are equipped with a closed loop cooling system with both vertical and horizontal ambient airflow. The vertical airflow also acts as vacuum hold-down for lighter weight substrates and excess fume exhaust. Our rugged conveyor top is lined with a Teflon-coated fiberglass mesh belt to transfer many different types of substrates at variable speeds up to 300 feet per minute (8000 sheets per hour).
The adjustable lamps can be focused to improve both temperature and UV spectral output. The Supreme Series power supply is located directly below the conveyor and lamp housing and acts as the base for the entire system. The system comes standard with a 400wpi mercury vapor lamp. These conveyor systems are mobile. Their heavy-duty metal casters allow the system to be reconfigured and to move from press to press with great flexibility.
With TEC Lighting you can expect high-quality standards for “Portable Searchlights”. The TECSAR Light offers incredible levels of blinding white light, averaging 4,000 luminous flux....
Guided by our relentless focus and commitment to our customers, TEC Lighting strives to deliver high quality print finishing equipment. Our core values are enacted in every action and shared by every associate. We'd like to hear your message!